The Knowledge Base development team is continually improving AllyCAD to meet our clients requirements as well as keeping up-to-date with the latest industry developments. Once you have purchased a specific version of our software, you are entitled to all updates (builds) for that specific version. Please note the following:

Updates (Builds) are version specific
You must have already installed the full version on your computer to use the update file
Make a note of the file size before downloading and check the file size after downloading
To renew your annual Subscription contract please contact us at info@knowbase.co.za

AllyCAD 8.2 Updates (latest Build)

Name	Build	Release Date	Size
AllyCAD 8.2 - PRO/SME/MICRO Versions HOTFIX Self extracting. Run this hotfix to update your existing AllyCAD 8.2 installation.	1	2018/11/27	11.0 MB
AllyCAD 8.2 Network Server HOTFIX Self extracting. Run this hotfix to update your existing AllyCAD 8.2 Network Server installation. WARNING: This version of the hotfix is for the Network Client/Server version only. It will not work for a standard install. For those systems you will need to install one of the other hotfixes listed above. If in doubt, please consult our support team before installing this particular hotfix !	1	2018/11/27	11.7 MB
AllyCAD 8.2 STUDENT Version HOTFIX Self extracting. Run this hotfix to update your existing AllyCAD Student 8.2 installation.	1	2018/11/27	10.8 MB
AllyCAD 8.2 HOME Version HOTFIX Self extracting. Run this hotfix to update your existing AllyCAD Home 8.2 installation.	1	2018/11/27	10.8 MB

AllyCAD 8.1 Updates (latest Build)

Name	Build	Release Date	Size
AllyCAD 8.1 - PRO/SME/INNOVATE Versions Self extracting, updated Help available as separate download. Run this to update your existing AllyCAD 8.1 installation to the latest release. IMPORTANT NOTE: This patch is only for users who have installed Release 1 or later. DO NOT INSTALL OVER AN EARLIER VERSION OR THE HOME VERSION. This patch includes all previous patches to the program.	7	2018/11/19	78.0 MB
AllyCAD 8.1 - PRO/SME/MICRO Versions HOTFIX Self extracting. Run this hotfix after updating your existing AllyCAD 8.1 installation to the latest release using the patch above.	7	2018/11/27	6.6 MB
AllyCAD 8.1 - PRO/SME/INNOVATE Versions HELP DOCUMENTATION Self extracting, split from main update to reduce download sizes. Run this to update the help and/or documentation in an existing AllyCAD 8.1 installation to the latest release.	7	2018/11/19	43.1 MB
AllyCAD 8.1 Network Server Self extracting, includes the latest Help update. Run this to update your existing AllyCAD 8.1 Network Server installation to the latest release. IMPORTANT NOTES: This patch is only for users who have installed Network Server Release 1 or later. DO NOT INSTALL OVER AN EARLIER VERSION OR THE HOME VERSION. This patch includes all previous patches to the program. WARNING: This version of the patch is for the Network Client/Server version only. It will not work for a standard install. For those systems you will need to install one of the patches listed above. If in doubt, please consult our support team before installing this particular patch !	7	2018/11/19	155.4 MB
AllyCAD 8.1 Network Server HOTFIX Self extracting. Run this hotfix after updating your existing AllyCAD 8.1 Network Server installation to the latest release using the patch above. WARNING: This version of the hotfix is for the Network Client/Server version only. It will not work for a standard install. For those systems you will need to install one of the other hotfixes listed above. If in doubt, please consult our support team before installing this particular hotfix !	7	2018/11/27	7.4 MB
AllyCAD 8.1 STUDENT Version Self extracting, updated Help available as separate download. Run this to update your existing AllyCAD Student 8.1 installation to the latest release. IMPORTANT NOTES: This patch is only for users who have installed STUDENT Release 1 or later. DO NOT INSTALL OVER AN EARLIER VERSION OF THE STUDENT VERSION. This patch includes all previous patches to the program.	7	2018/11/19	44.9 MB
AllyCAD 8.1 STUDENT Version HOTFIX Self extracting. Run this hotfix after updating your existing AllyCAD Student 8.1 installation to the latest release using the patch above.	7	2018/11/27	6.5 MB
AllyCAD 8.1 STUDENT HELP DOCUMENTATION Self extracting, split from main update to reduce download sizes. Run this to update the help and/or documentation in an existing AllyCAD Student 8.1 installation to the latest release.	7	2018/11/19	43.0 MB
AllyCAD 8.1 HOME Version Self extracting, updated Help available as separate download. Run this to update your existing AllyCAD Home 8.1 installation to the latest release. IMPORTANT NOTES: This patch is only for users who have installed HOME Release 1 or later. DO NOT INSTALL OVER AN EARLIER VERSION OF THE HOME VERSION. This patch includes all previous patches to the program.	7	2018/11/19	45.0 MB
AllyCAD 8.1 HOME Version HOTFIX Self extracting. Run this hotfix after updating your existing AllyCAD Home 8.1 installation to the latest release using the patch above.	7	2018/11/27	6.5 MB
AllyCAD 8.1 HOME HELP DOCUMENTATION Self extracting, split from main update to reduce download sizes. Run this to update the help and/or documentation in an existing AllyCAD Home 8.1 installation to the latest release.	7	2018/11/19	43.1 MB

AllyCAD 8.0 Updates (latest Build)

Name	Build	Release Date	Size
AllyCAD 8.0 - PRO/SME/INNOVATE Versions Self extracting, updated Help available as separate download. Run this to update your existing AllyCAD 8.0 installation to the latest release. IMPORTANT NOTE: This patch is only for users who have installed Release 1 or later. DO NOT INSTALL OVER AN EARLIER VERSION OR THE HOME VERSION. This patch includes all previous patches to the program. NO FURTHER UPDATES WILL BE ISSUED FOR THIS VERSION.	12	2018/11/20	106.0 MB
AllyCAD 8.0 - PRO/SME/INNOVATE Versions HELP DOCUMENTATION Self extracting, split from main update to reduce download sizes. Run this to update the help and/or documentation in an existing AllyCAD 8.0 installation to the latest release. NO FURTHER UPDATES WILL BE ISSUED FOR THIS VERSION.	8	2017/07/28	41.0 MB
AllyCAD 8.0 Network Server Self extracting, includes the latest Help update. Run this to update your existing AllyCAD 8.0 Network Server installation to the latest release. IMPORTANT NOTES: This patch is only for users who have installed Network Server Release 1 or later. DO NOT INSTALL OVER AN EARLIER VERSION OR THE HOME VERSION. This patch includes all previous patches to the program. WARNING: This version of the patch is for the Network Client/Server version only. It will not work for a standard install. For those systems you will need to install one of the patches listed above. If in doubt, please consult our support team before installing this particular patch ! NO FURTHER UPDATES WILL BE ISSUED FOR THIS VERSION.	12	2018/11/20	184.0 MB
AllyCAD 8.0 HOME Version Self extracting, updated Help available as separate download. Run this to update your existing AllyCAD Home 8.0 installation to the latest release. IMPORTANT NOTES: This patch is only for users who have installed HOME Release 1 or later. DO NOT INSTALL OVER AN EARLIER VERSION OF THE HOME VERSION. This patch includes all previous patches to the program. NO FURTHER UPDATES WILL BE ISSUED FOR THIS VERSION.	12	2018/11/20	59.2 MB
AllyCAD 8.0 HOME HELP DOCUMENTATION Self extracting, split from main update to reduce download sizes. Run this to update the help and/or documentation in an existing AllyCAD Home 8.0 installation to the latest release. NO FURTHER UPDATES WILL BE ISSUED FOR THIS VERSION.	8	2017/07/28	41.0 MB

AllyCAD SENTINEL/HASP DRIVER UPDATES

Name	Build	Release Date	Size
2018/12/07 - SENTINEL Network Licence Manager NetworkLicenceManager_Setup.exe Win Vista/7/8.1/10 and Win Server 2003/2008/2012 R2/2016 Standalone network licence manager for Sentinel network licences. This application is NOT required for physical dongles or non-network Sentinel licences.	n/a	2018/12/07	46.6 MB
2018/12/07 - SENTINEL Network Licence Manager Update NetworkLicenceManager_Update.exe Win Vista/7/8.1/10 and Win Server 2003/2008/2012 R2/2016 Update installed standalone network licence manager for Sentinel network licences to the latest version. This will only update existing installed licence managers.	n/a	2018/12/07	13.5 MB
2018/08/10 - SENTINEL DRIVER UPDATE HaspUserSetup.exe Win XP/Vista/7/8.1/10 and Win Server 2003/2008/2012 R2/2016 compatible Updated Sentinel Hasp Device Driver GUI Installer (version 7.81). This driver is NOT required for AllyCAD 3.6 Micro. Note: The RTE installer adds a firewall rule (named "Sentinel License Manager") that, in the past, allowed incoming connections from any network, including public networks, using port 1947. Starting with RTE version 7.80, the firewall rule added by the RTE Installer does not allow incoming connections from public networks. If you are upgrading from an earlier version of RTE, the installer replaces the existing rule (that allows connections from public networks) with a rule that blocks such connections. You can manually allow access using this port from public networks, but Gemalto highly recommends against this. If you do plan to allow access from public networks using port 1947, create a rule with a different name in order to prevent future RTE upgrades from removing this access.	n/a	2018/07	16.7 MB
2018/08/10 - SENTINEL DRIVER UPDATE haspdinst.exe Win XP/Vista/7/8.1/10 and Win Server 2003/2008/2012 R2/2016 compatible Updated Sentinel Hasp Device Driver Commandline Installer (version 7.81). Run with the commandline option -i to install, -info to show installed version, -r to remove or -help for assistance. This driver is NOT required for AllyCAD 3.6 Micro. Note: The RTE installer adds a firewall rule (named "Sentinel License Manager") that, in the past, allowed incoming connections from any network, including public networks, using port 1947. Starting with RTE version 7.80, the firewall rule added by the RTE Installer does not allow incoming connections from public networks. If you are upgrading from an earlier version of RTE, the installer replaces the existing rule (that allows connections from public networks) with a rule that blocks such connections. You can manually allow access using this port from public networks, but Gemalto highly recommends against this. If you do plan to allow access from public networks using port 1947, create a rule with a different name in order to prevent future RTE upgrades from removing this access.	n/a	2018/07	16.8 MB
2011/13/14 - HASP DRIVER REMOVAL TOOL HASP_SRM_Run-time_Environment_Removal_Tool.zip Win XP/Vista/7 and Win Server 2003/2008 compatible Hasp Dongle driver removal utility (version 1.10). Extract the contents of the zip file then follow the instructions in the accompanying readme.html file. NOTE: This tool is intended to remove older versions of the Hasp drivers than we currently supply (listed above). To remove the later versions uninstall through Control Panel.	n/a	2011/10/27	135.7 KB
2011/13/14 - HASP LICENSE MANAGER UPDATE Hasp_License_Manager_8.32.zip Updated Hasp License Manager (version 8.32). Extract contents and run lmsetup.exe to install the latest version of the manager which is Windows Server 2008 compatible. This license manager is NOT required for AllyCAD Micro, or for anyone else not using Network dongles.	n/a	2008/10/14	15.9 MB

Archived update resources